Stone Treat

Efflo Clean


Efflo-Clean is suitable for non acidic sensitive stones including granite, slate, basalt, brick, cast stone, terracotta tile, porcelain tile, and ceramic. Treated indoor and outdoor surfaces become easier to clean, maintain and keep looking good for longer.

Typical Applications

Efflo-Clean is suitable for a wide variety of applications, including building entertaining areas, facades, floors, garages, kitchen, patios, swimming pool surrounds and walls


Efflo-Clean is:

How to Use:

  1. First, test product on a small area and to determine the ease of application and desired results, allow a 24-hour cure time.
  2. Stir 1 quart of content into plastic bucket containing 5 quartsof clean warm water. This is enough to clean 160.sq.ft., depending on surface conditions.
  3. Apply when surface temperature 5 to 35 C° (40 to 95 F°).
  4. Make sure that the surfaces to be treated are dry, clean and free of residues.
  5. Product is to be applied without thinning.
  6. Generously saturate the surface with product using a spray, a clean brush, or similar. Leave for 3-5 minutes. Rub the surface with a clean white dry cloth to remove excess product.
  7. Clean surface with clean water using mop or wet vaccum
  8. .



Keep in original container. Store locked up. Protect from freezing. Dispose of container to authorized chemical landfill or if organic to high temperature incineration.