Surface Clean

Uses:

Suitable for tile, grout, brick, and other hard surfaces, Surface-clean is a new power foam formula.

Typical Applications

Including building entertaining areas, facades, floors, garages, kitchen, patios, swimming pool surrounds and walls; Surface-clean is suitable for a wide variety of applications.

Benefits

• S lean works as per triple action formula including alakaline + detergent +oxygen.
• Surface-clean sanitizes and smashes down unpleasant smell.

How to Use:

1. First, test product on a small area and to determine the ease of application and desired results, allow a 24-hour cure time.
2. Apply when surface temperature 5 to 35 C° (40 to 95 F°).
3. Stir 1/3 of a bottle into plastic bucket containing 8 litres of clean warm water.
4. Generously saturate the surface with product using a spray, a clean brush, or similar. Leave for 3 minutes.
5. Repeat application if required.
6. Rinse the surface with clean water.
7. One 1kg/2.2lb bottle of Surface Clean cleans upto500 sq.feet.

Preacautions:

• Apply when surface temperature 5 to 35 C° (40 to 95 F°).
• Avoid applying in windy conditions.
• Do not take internally.
• For 6 hours after application, avoid moisture contact with the surface.
• Keep away from drains, plants, water and soil.
• Protect surrounding areas from over spray.
• Use only in well-ventilated areas.
• Use a positive pressure respirator if ventilation is inadequate.
• Wear suitable solvent-resistant gloves, protective clothing, safety goggles and an organic vapor respirator during application.
• Wash hands thoroughly after use.

Storage:

Fluid must NOT be kept in a bolted container once it has been mixed.